Looking for washbasin brackets

[Andrew Bodenham]

Trying to find a supplier of cast iron washbasin brackets to wall mount a couple of unspectacular 1930's-ish basins. Ideally I'm after the type which support the basin at the front and back, and form a towel rail along each side. The basins have holes near the front corners - I'm presuming that these are to locate onto a lug on the bracket. From the back of the basin to the centre of the holes is about 15".

I've googled without much success, so any ideas for a supplier of original or new repro brackets please?

 

[Jon Maine]

Found this pair on Ebay
http://cgi.ebay.co.uk/VINTAGE-CASTE-IRON-SINK-SUPPORT-BRACKETS_W0QQitemZ260240187002QQcmdZViewItem?IMSfp=TL0805141325a34103

 

[Juju]

You could try this company http://www.oldfashionedbathrooms.co.uk

I bought a great bath from them years ago. I seem to recall they had brackets and all sorts - repro and some original.

 

[Lime]

Lots of places sell them still.

This site has a great many different types.

http://www.thomasdudley.co.uk/mc_brackets_bbs.asp

 

[vicky whitworth]

Hi, bought mine for a £1 at Honiton tip/recycling centre. Exactly as you describe with a towel rail under - no fancy frills just good, solid iron. Quick scrape off of the rust and a coat of paint and they look a treat. Try your local recycling centre or advertise on http://www.freecycle.org.